Prof. Raymond Boxman

Emeritus in School of Electrical Engineering
ביה"ס להנדסת חשמל אמריטוס
Prof. Raymond Boxman
Phone: 03-6407364
Fax: 09-9554705
Office: Computer and Software Engineering, 507

Research Interests:

Electrical discharges in liquids, gases and vacuum;

;Deposition of thin films and coatings

;Synthesis of carbon nano-tubes and other nano-particles

;Microwave RF Apparatus and Applications

Articles in Journals

  1. R.L. Boxman, “Interferometric Measurement of Electron and Vapor Densities in a High-Current Vacuum Arc,” Journal of Applied Physics, Vol. 45, pp. 4835-484 6, 1974.
  2. R.L. Boxman, “Measurement of Anode Surface Temperature During a High Current Vacuum Arc,” Journal of Applied Physics, Vol. 46, pp. 4701-4704, 1975.
  3. R.L. Boxman, “Magnetic Constriction Effects in High-Current Vacuum Arcs Prior to the Release of Anode Vapor,” Journal of Applied Physics, Vol. 48, pp. 2338-2345, 1977.
  4. R.L. Boxman, “High Current Vacuum Arc Column Motion on Rail Electrodes,” Journal of Applied Physics, Vol. 48, pp. 1885-1890, 1977.
  5. R.L. Boxman, “Triggering Mechanisms in Triggered Vacuum Gaps,” IEEE Trans. Electron Devices, Vol. ED-24, 122-128, 1977.
  6. R.L. Boxman, J.H. Harris, and A. Bless, “Time Dependence of Anode Spot Formation Threshold Current in Vacuum Arcs,” IEEE Trans. Plasma Science, Vol. PS-6, pp. 233-238, 1978.
  7. R.L. Boxman and M.L. Sloan, “A Scanning Technique for Obtaining Linear Fringe Shift Readout from a High Resolution Interferometer,” Applied Optics, Vol. 17, pp. 2794-2797, 1978.
  8. R.L. Boxman and D.J. Shlien, “Interferometric Technique for Measuring the Refractive Index Variation of a Liquid with Temperature,” Review of Scientific Instruments, Vol. 49, pp. 861-863, 1978.
  9. R.L. Boxman and D.J. Shlien, “Interferometric Measurement Technique for the Temperature Field of Axisymmetric Buoyant Phenomena,” Applied Optics, Vol. 17, pp. 2788-2793, 1978.
  10. D.J. Shlien and R.L. Boxman, “Temperature Field Measurement of an Axisymmetric  Laminar Plume,” Phys. Fluids, Vol. 22, pp. 631-634. 1979.
  11. D.J. Shlien and R.L. Boxman, “Laminar Starting Plume Temperature Field Measurement,” Int. J. Heat and Mass Transfer, Vol. 24, pp. 919-931, 1981.
  12. R.L. Boxman and S. Goldsmith, “Excited State Densities in a Multi­Cathode-Spot Al Vacuum Arc., I. Spectroscopic Measurements,” Journal of Applied Physics, Vol. 51, pp. 3644-3656, 1980.
  13. S. Goldsmith and R.L. Boxman, “Excited State Densities in a Multi­Cathode-Spot Al Vacuum Arc, II. Theoretical Approach” Journal of Applied Physics, Vol. 51, pp. 3657-3663, 1980.
  14. V.A. Finch, R. Dmiel, R. Boxman, A. Shkolnik and C. Taylor, “Why Black Goats in Hot Deserts? Effects of Coat Color on Heat Exchange of Wild and Domestic Goats,” Physiol. Zool. Vol. 53, pp. 19-25, Jan 1980.
  15. R.L. Boxman and S. Goldsmith, “The Interaction Between Plasma and Macroparticles in a Multi-Cathode-Spot Vacuum Arc”, Journal of Applied Physics, Vol. 52, pp. 151-162, 1981.
  16. R.L. Boxman, E. Gerby and S. Goldsmith, “Behavior of High-Current Vacuum Arc Between Hollow Cylindrical Electrodes in a Radial Magnetic Field,” IEEE Trans. Plasma Sci. (Special Issue on Arc Plasmas) Vol. PS-8, pp. 308-313, 1980.
  17. S. Goldsmith, S. Shalev, and R.L. Boxman, “Excited State Densities in a Multi-Cathode-Spot Cd Vacuum Arc,” Physica, Vol. 104C, pp. 107-115, 1981.
  18. S. Shalev, S. Goldsmith and R.L. Boxman, “Population Inversion of Cd+ Excited-States in the Plasma of Cadmium Vapor Vacuum Arc,” IEEE J. Quant. El., Vol. QE-17, pp. 8-10, 1981. 
  19. S. Goldsmith and R.L. Boxman, “Coulomb Approximation Calculations of Transition Probabilities in the Transition Array  in Cu II”, J. Phys. B: Atom. Molec. Phys. Vol. 14, pp. 3031-3036, 1981. 
  20. R. L. Boxman and S. Goldsmith, “A Model of the Anode Region in a Uniform Multi-Cathode-Spot Vacuum Arc”, Journal of Applied Physics, Vol. 54, pp. 592-602, 1983. 
  21. S. Shalev, S. Goldsmith, and R.L. Boxman, “Absorption Effects of the Cd II 4416 A Line in a Cadmium Vacuum Arc Plasma”, Journal of Applied Physics, Vol. 53, pp. 6736-6741, 1982.
  22. F.T. Warren, J.M. Wilson, J.E. Thompson, R.L. Boxman, and T. Sudarshan, “Vacuum Switch Trigger Delay Characteristics”, IEEE Trans. Plasma Sci. (special issue on Plasma Switching), PS-10, pp. 298-301, 1982.
  23. J.M. Wilson, R.L. Boxman, and J.E. Thompson, “Breakdown Time of a Triggered Vacuum and Low-Pressure Switch”, IEEE Trans. Electrical Insulation Vol. EI-18, pp. 238-242, 1983.
  24. R. L. Boxman, S. Goldsmith, I. Izraeli, and S. Shalev, “A Model of the Multi-Cathode-Spot Vacuum Arc”, IEEE Trans. Plasma Sci. Vol.  PS-11, pp. 138-145, 1983.
  25. S. Goldsmith, S. Shalev and R.L. Boxman, “Anode Melting in a Multi Cathode-Spot Vacuum Arc”, IEEE Trans. Plasma Sci.,  Vol. PS-11, pp. 127-132, 1983.
  26. S. Shalev, S. Goldsmith and R.L. Boxman, “In-situ Determination of Macroparticles Velocity in a Copper Vacuum Arc”, IEEE Trans. Plasma Sci., Vol. PS-11, pp. 146-151, 1983.
  27. I. Izraeli, S. Goldsmith and R.L. Boxman, “The Influence of the Self Magnetic-Field on the Steady State Current Distribution in an Axially Flowing Conducting Medium”, IEEE Trans. Plasma Sci. Vol. PS-11, pp. 160-164, 1983.
  28. F.T. Warren, R.L. Boxman, J.E. Thompson and T. Sudarshan, “Current Evolution in a Pulsed Overstressed Radial Vacuum Gap”, IEEE Trans. Electrical Insulation, Vol. EI-18, pp. 226-229, 1983. 
  29. R. Lee, T. Sudarshan, J.E. Thompson, G.R. Nagabhoshana and R.L. Boxman, “Predischarge Current Measurement in Vacuum Gaps Bridged with Plexiglass Insulators”, IEEE Trans. Electrical Insulation, Vol. EI-18, pp. 280-286, 1983.
  30. S. Goldsmith, Y. Bresler and R.L. Boxman, “Spectroscopic Study of Excited-State Densities in a Zn Vacuum-Arc Plasma”, Journal of Applied Physics, Vol. 54, pp. 5691-5697, 1983.
  31. S. Shalev, S. Goldsmith, R. Boxman, S. Einav, A. Avidor, “Laser Doppler Annenometry: A method for measuring macroparticle dynamics in vacuum arcs”, J. Phys. E: Scientific Instruments, Vol. 17, pp. 56-61, 1984.
  32. S. Shalev, R.L. Boxman, S. Goldsmith, “Velocities & Emission Rates of Cathode Produced Molybdenum Macroparticles in a Vacuum Arc”. Journal of Applied Physics, Vol. 58, pp. 2503-2507, 1985.
  33. I. Israeli, A. Whitman, R.L. Boxman and S. Goldsmith, “Asymptotic Analysis of the Steady State Current Flow in a Uniform Multi-Cathode-Spot Generated Vacuum Arc Plasma Flow”. IEEE Trans. Plasma Science, Vol. PS-13, pp. 281-284, 1985.
  34. B. Gellert, E. Schade and R.L. Boxman, “Time and Spatially Resolved Spectroscopy of the Plasma State Prior to and During Anode Spot Formation in High Current Vacuum Arcs”. IEEE Trans. Plasma Science, Vol. PS-13, pp. 265-268, 1985.
  35. S. Shalev, R.L. Boxman and S. Goldsmith, “Macroparticle Dynamics During Multi-Cathode-Spot Vacuum Arcs”. IEEE Trans. Plasma Science, Vol. PS 14, pp. 59-62, 1986.
  36. R.L. Boxman, S. Goldsmith, S. Shalev, H. Yaloz and N. Brosh, “Fast Depositions of Metallurgical Coatings and Production of Surface Alloys Using a Pulsed High Current Vacuum Arc”. Thin Solid Films, Vol. 139, pp. 41-52, 1986.
  37. G. Disatnik, R.L. Boxman, S. Goldsmith, “Characteristics of macro particle emission from a high current density multi-cathode-spot pulsed vacuum arc”, IEEE Trans. Plasma Sci., Vol. PS-15, pp. 520-523, 1987.
  38. S. Goldsmith, R.L. Boxman, E. Sapir, Y. Cohen, H. Yaloz, N. Brosh, “Distribution of peak temperature and energy flux on the surface of the anode in a multi-cathode-spot pulsed vacuum arc”, IEEE Trans.Plasma Sci., Vol. PS­ 15, pp. 510-514, 1987.
  39. I. Izraeli, R.L. Boxman, S. Goldsmith, “The current distribution and the magnetic pressure profile in a vacuum arc subjected to an axial magnetic field”, IEEE Trans. Plasma Sci., Vol. PS-15, pp. 502-505, 1987.
  40. S. Bababeygy, R.L. Boxman, S. Goldsmith, “Corrosion evaluation of very rapid high-current vacuum arc coatings”, IEEE Trans. Plasma Sci., Vol. PS-15, pp. 599-602, 1987.
  41. R.L. Boxman and S. Goldsmith, “Cathode-spot arc coatings: physics, deposition and heating rates, and some examples”, Surface and Coatings Technology, Vol. 33, pp. 153-167, 1987.
  42. Y. Cohen, R.L. Boxman and S. Goldsmith, “Angular distribution of ion current emerging from an aperture anode in a vacuum arc”, IEEE Trans. Plasma Sci., Vol. PS-17, pp. 713-716, 1989.
  43. R.L. Boxman and S. Goldsmith, “A model for a uniform steady-state vacuum arc with a hot anode”, IEEE Trans. Plasma Sci., Vol. PS-17, pp. 661-665, 1989.
  44. R.L. Boxman and S. Goldsmith, “Principles and applications of vacuum arc coatings”, IEEE Trans. Plasma Sci., Vol. PS-17, pp. 705-712,1989.
  45. R. Rosenbaum, M. Ben-Shlomo, S. Goldsmith and R.L. Boxman, “Low temperature electronic transport properties of W, Mo, Ta and Zr thin films”, Phys. Rev.  B . Vol. 39, pp. 10009-10019, 1989.
  46. U. Ghera, R.L. Boxman, S. Ruschin and H. Kleinman, “Laser induced electron source in a vacuum diode”, Journal of Applied Physics,  Vol. 66, pp. 4425-4430, 1989.
  47. R.L. Boxman and S. Goldsmith, “Momentum interchange between cathode spot plasma jets and background gases and vapors and its implication on vacuum arc anode spot development”, IEEE Trans. Plasma Sci. Vol. PS-18, pp. 231-236, 1990.
  48. R.L. Boxman and S. Goldsmith, “Characterization of a 1 kA vacuum arc plasma gun for use as a metal vapor deposition source”, Surface and Coatings Technology, Vol. 43/44, pp. 1024-1034, 1990.
  49. R.L. Boxman and S. Goldsmith, “Macroparticle Contamination in Cathodic Arc Coatings: Generation, Transport, and Control”, Surface  and­ Coatings Technology, Vol. 52, pp. 39-50, 1992.
  50. A. Ben-Shalom, R.L. Boxman and S. Goldsmith, “Ion current collected at various distances and argon background pressures in a copper vacuum arc”, IEEE Trans. Plasma Sci. Vol. 21, pp. 435-439, 1993.
  51. N. Parkansky, I. Beilis, R.L. Boxman and S. Goldsmith, “Electrode erosion during pulsed arcing”, IEEE Trans. Plasma Sci. Vol. 21, pp. 458-462, 1993.
  52. R.L. Boxman and S. Goldsmith, “Mass and surface conductivity gain on polymer surfaces metalized using vacuum arc deposition”, Thin Solid Films, Vol. 236, pp. 341-346, 1993.
  53. A. Ben-Shalom, L. Kaplan, R.L. Boxman, M. Nathan and S. Goldsmith, “SnO2 transparent conductor films produced by a filtered vacuum arc”, Thin Solid Films, Vol. 236, pp. 20-26, 1993.
  54. N. Parkansky, R.L. Boxman and S. Goldsmith, “Development and application of pulsed air arc deposition”, Surface and Coatings Technology, Vol. 61, pp. 268-273, 1993.
  55. V.N. Zhitomirsky, R.L. Boxman, S. Goldsmith, “Influence of an external magnetic field on cathode spot motion and coating deposition using filtered arc evaporation”, Surface and Coatings Technology, Vol. 68/69, pp. 146-151, 1994.
  56. L. Kaplan, A. Ben-Shalom, R.L. Boxman, S. Goldsmith, U. Rosenberg, M. Nathan, “Annealing and Sb-Doping of Sn-0 films produced by filtered vacuum arc deposition: structure and electro-optical properties”, Thin Solid Films, Vol. 253, pp. 1-8, 1994.
  57. D. Arbilly, R.L. Boxman, S. Goldsmith, A. Rothwarf, L. Kaplan, “Amorphous Si thin films prepared by vacuum arc deposition”, Thin Solid Films, Vol. 253, pp. 62-66, 1994.
  58. N. Parkansky, R.L. Boxman, S. Goldsmith, Y. Rosenberg, A. Ben-Shalom, L. Kaplan, D. Arbilly, “Improvement of thin film semi-conductor conductivities using a transverse current during deposition”, Surface and Coatings Technology, Vol. 68/69, pp. 320-324, 1994.
  59. K. Pourrezaei, I. Shevets, M. Delaurentis, R.L. Boxman, R.B. Beard, N. Croitoru, M. Mukhtar, D.A. Logan, R. Rastogi, “Development of antimicrobial and antithrombogenic coatings for inside and outside of medical catheters”, Surface and Coatings Technol., Vol. 68/69, pp. 669-674, 1994.
  60. R.L. Boxman, S. Goldsmith, A. Ben-Shalom, L. Kaplan, D. Arbilly, E. Gidalevich, V.N. Zhitomirsky, A. Ishaya, M. Keidar, I. Beilis, “Filtered vacuum arc deposition of semi-conductor thin films”, IEEE Trans. Plasma Sci., Vol. 23, pp. 939-944, 1995.
  61. M. Keidar, I. Beilis, R.L. Boxman and S. Goldsmith, “Non-stationary macroparticle charging in an arc plasma jet”, IEEE Trans. Plasma Sci., Vol. 23, pp. 902-908, 1995.
  62. H. Rosenthal, I. Beilis, S. Goldsmith and R.L. Boxman, “Heat fluxes during the development of hot anode vacuum arc”, J. Phys. D.: Applied Physics, Vol. 28, pp. 353-363, 1995.
  63. V.N. Zhitomirsky, R.L. Boxman and S. Goldsmith, “Unstable arc operation and cathode spot motion in a magnetically filtered vacuum arc deposition system”,  J. Vac. Sci. Technol. A, Vol. 13, pp. 2233-2240, 1995.
  64. L. Kaplan, V.N. Zhitomirsky, R.L. Boxman and S. Goldsmith, “Arc behavior during filtered vacuum arc deposition of Sn-O thin films”, Surface and Coatings Technology, Vol. 76/77, pp. 181-189, 1995
  65. V.N. Zhitomirsky, L. Kaplan, R.L. Boxman and S. Goldsmith, “Ion current distribution in a filtered vacuum arc deposition system”, Surface and Coatings Technology, Vol. 76/77, pp. 190-196, 1995.
  66. N. Parkansky, R. Rosenbaum, Y. Rosenberg, R.L. Boxman and S. Goldsmith, “Influence of transverse current during In-O vapor deposition”, Surface and Coatings Technology, Vol. 76/77, pp. 197-201, 1995.
  67. N. Parkansky, R.L. Boxman, S. Goldsmith and Y. Rosenberg, “Corrosion resistance of Zn-coatings produced by pulsed-air arc deposition”, Surface and Coatings Technology, Vol. 76/77, pp. 352-357, 1995.
  68. M. Keidar, I. Beilis, R.L. Boxman and S. Goldsmith, “Transport of macroparticles in magnetized plasma ducts”, IEEE Trans. Plasma Sci., Vol. 24, pp. 226-234, 1996.
  69. U. Kinrot, S. Goldsmith and R.L. Boxman, “Monochromatic imaging of cathodic arc plasma”, accepted for publication in IEEE Trans. Plasma Sci., (special issue on plasma imaging) Vol. 24, pp. 71-72, 1996.
  70. M. Keidar, I. Beilis, R.L. Boxman and S. Goldsmith, “2D expansion of the low-density interelectrode vacuum arc plasma jet in an axial magnetic field”, J. Phys. D: Appl. Phys, Vol. 29, pp. 1973-1983, 1996.
  71. M. DeLaurentis, R.L. Boxman, K. Pourrezaei, I. Shvets, R. Beard and M. Muhktar, “Reduction of  intravascular catheter infection using Ag and Ag/Pt coatings”, accepted for publication in J. Infectious Disease.
  72. B. Alterkop, E. Gidalevich, S. Goldsmith and R.L. Boxman, “Vacuum arc plasma jet propagation in a toroidal duct”, J. Appl. Phys., Vol. 79, pp. 6791-6802, 1996.
  73. R.L. Boxman, S. Goldsmith, V.N. Zhitomirsky, B. Alterkop, E. Gidalevich, I. Beilis and M. Keidar, “Recent progress in filtered vacuum arc deposition”, Surf. Coat. Technol. Vol. 86-87, pp. 243-253, 1996.
  74. N. Parkansky, B. Alterkop, R. Rosenbaum, R.L. Boxman and S. Goldsmith, “The effect of post-deposition transverse current injection on amorphous indium oxide film conductivity”, Thin Solid Films, Vol. 333, pp 150-156, 1998.
  75. M. Keidar, I. Beilis, R.L. Boxman and S. Goldsmith, “Macroparticle interaction with a substrate in cathodic vacuum arc deposition”, Surf. Coat. Technol. Vol. 86-87, pp. 415-420, 1996.
  76. V.N. Zhitomirsky, U. Kinrot, B. Alterkop, R.L. Boxman and S. Goldsmith, “Influence of gas pressure on the ion current distribution in a filtered vacuum arc deposition system”, Surf. Coat. Technol.Vol. 86-87, pp. 263-270, 1996.
  77. L. Kaplan, I. Rusman, R.L. Boxman, S. Goldsmith, M. Nathan, and E. Ben-Jacob, “STM and XPS  Study of Filtered Vacuum Arc Deposited Sn-O Films After Rapid Thermal Annealing”, Thin Solid Films Vol. 290-291, pp. 355-361, 1996.
  78. H. Rosenthal, I. Beilis, S. Goldsmith, and R.L. Boxman, “A spectroscopic investigation of the development of a hot-anode vacuum arc”, J. Phys. D.: Appl. Phys. Vol. 29, pp. 1245-1259, 1996.
  79. B. Alterkop, V.N. Zhitomirsky, S. Goldsmith, and R.L. Boxman, "Propagation of vacuum arc plasma beam in a toroidal filter", IEEE Trans. Plasma Sci., Vol. 24, pp 1371-1377, 1996.
  80. B. Alterkop, N. Parkansky, R.L. Boxman, S. Goldsmith. "Influence of A Parallel Electric Field on The Conductivity of A Growing Indium Oxide Film”, Thin Solid Films Vol. 290-291, pp. 10-12, 1996.
  81. B. Alterkop, E. Gidalevich, S. Goldsmith and R.L. Boxman. "Numerical calculation of plasma beam propagation in a toroidal duct with magnetized electrons and unmagnetized ions" J. Physics D: Applied Physics Vol. 29, pp. 1-7, 1996.
  82. E. Halachmi, O. Levi, L. Kronik, and R.L. Boxman, “Development of Latent Fingerprints Using a Corona Discharge”, J. Forensic Sci. 42, pp. 833-841, 1997.
  83. M. Keidar, I. Beilis, R.L. Boxman, and S. Goldsmith, “Voltage of the vacuum arc with a ring anode in an axial magnetic field”, IEEE Trans. Plasma Sci., Vol. 25, pp. 580-585, Aug. 1997.
  84. R.L. Boxman, S. Goldsmith, and A. Greenwood, “Twenty-five years of progress in vacuum arc research and utilization”, IEEE Trans. Plasma Sci., Vol. 25, pp. 1174-1186,  Dec. 1997.
  85. M. Keidar, I. Beilis, R. Aharonov, D. Arbilly, R.L. Boxman, S. Goldsmith, “Macroparticle distribution in a quarter-torus plasma duct of a filtered vacuum arc deposition system”, J. Phys. D: Appl. Phys. Vol. 30, pp. 2972-2978, 1997.
  86. N. Parkansky, B. Alterkop, W. Schuster, R.L. Boxman, and S. Goldsmith “Vacuum arc deposition of Ti-films with transverse current injection”, J. Appl. Phys. Vol. 82, pp. 4062-66, 1997.
  87. I. Grimberg, V.N. Zhitomirsky, N. Parkansky, A. Matthews, A. Wilson, R.L. Boxman, B.Z. Weiss, and S. Goldsmith, "Structure and Tribological Properties of Thin Vacuum Arc Coatings on Polysulfone", Surf. Coat. Technol. Vol. 94/95, pp. 213-219, 1997.
  88. V.N. Zhitomirsky, I. Grimberg, R.L. Boxman, B.Z. Weiss, N.A. Travitzky and S. Goldsmith, "Vacuum Arc Deposition and Microstructure of ZrN-Based Coatings", Surf. Coat. Technol. Vol. 94/95, pp. 207-212, 1997.
  89. V.N. Zhitomirsky, I. Grimberg, I. Rapoport, N.A. Travitsky, R.L. Boxman, S. Goldsmith, A Raihel, I. Lapsker, and B.Z. Weiss, “Structure and Mechanical Properties of Vacuum Arc Deposited NbN Coatings”, Thin Solid Films Vol. 326, pp 134-142, 1998.
  90. I.I. Beilis, M. Keidar, R.L. Boxman, S. Goldsmith, “Nonequilibrium Macroparticle Charging in Low-Density Discharge Plasmas”, IEEE Trans. Plasma Sci., Vol. 25, pp. 346-352, 1997.
  91. V.N. Zhitomirsky, R.L. Boxman and S. Goldsmith, " Ion current distribution in a toroidal duct of a filtered vacuum arc deposition system", IEEE Trans. Plasma Sci., Vol. 25, No 5, pp. 665-669, 1997.
  92. I. Beilis, M. Keidar, R.L. Boxman, and S. Goldsmith, “Theoretical study of plasma expansion in a magnetic field in a disc anode vacuum arc”, J. Appl. Phys, Vol. 83, pp. 709-717, 1998.
  93. E. Gidalevich, R.L. Boxman, and S. Goldsmith, “Theory and modeling of the interaction of two parallel supersonic plasma jets”, J. Phys. D: Appl. Phys., Vol. 31, pp. 304-311, 1998.
  94. I.I. Beilis, M. Keidar, R.L. Boxman and S. Goldsmith, “Macroparticle separation and plasma collimation in positively biased ducts in filtered vacuum arc deposition systems”, J. Appl. Phys., Vol. 85, pp. 1358-1365, 1999.
  95. I. Grimberg, V.N. Zhitomirsky, R.L. Boxman, S Goldsmith, and B.Z. Weiss, "Multicomponent Ti-Zr-N and Ti-Nb-N coatings deposited by vacuum arc", Surf. Coat. Technol. Vol. 108-109, pp. 154-159, 1998.
  96. V.N. Zhitomirsky, I. Grimberg, M.C. Joseph, R.L. Boxman, B.Z. Weiss, A. Matthews, and S. Goldsmith, "Vacuum Arc Deposition of Metal/Ceramic Coatings on Polymer Substrates", Surf. Coat. Technol. Vol. 108-109, pp. 160-165, 1998.
  97. N. Parkansky, I. Beilis, L. Rapoport, R.L. Boxman, S. Goldsmith, and Y. Rosenberg, “Electrode erosion and coating properties in pulsed air arc deposition of WC-based alloys”, Surface and Coatings Technology, Vol. 105, pp. 130-134, 1998.
  98. B. Alterkop, E. Gidalevich, S. Goldsmith, and R.L. Boxman, “Propagation of a magnetized plasma beam in a toroidal filter”, J. Phys. D: Appl. Phys. Vol. 31, pp. 873-879, 1998.
  99. L. Rapoport, A. Rayhel, I. Lapsker, N. Parkansky, R.L. Boxman, S. Goldsmith, “The effect of electricity on the mechanical properties of WC - Co alloy”, J. Mechan, Behav. of Materials, Vol. 9 pp. 267-276, 1998.
  100. N. Parkansky, I. Beilis, R.L. Boxman, S. Goldsmith, Yu. Rosenberg, “Anode mass loss during pulsed air arc deposition”, Surface and Coating Technology, Vol. 108-109, pp.253-256, 1998.
  101. N. Parkansky, B. Alterkop, S. Goldsmith, R.L. Boxman, Yu. Rosenberg, “The effect of transverse current injection during air annealing of the formation of oxides in thin Ti films”, J. Appl. Phys., Vol. 85, pp. 498-500, 1999.
  102. I. I. Beilis, R. L. Boxman, and S. Goldsmith. "Steady-state model of a refractory hot anode vacuum Arc", J. Phys. D: Appl. Phys., Vol. 32, pp.153-158, 1999.
  103. I.I. Beilis, M. Keidar, R.L. Boxman, and S. Goldsmith, “Effect of macroparticle separation in positively biased ducts in the filtered vacuum arc deposition systems”, Surface and Coatings Technology, Vol. 108-109, pp.148-153, 1998.
  104. R Ben-Ami, V N Zhitomirsky, R L Boxman and S Goldsmith, "Plasma distribution in a triple-cathode vacuum arc deposition apparatus" Plasma Sources Sci. Technol., 8, No 3 (1999), pp.355-362.
  105. V.N. Zhitomirsky, I. Grimberg, L. Rapoport, N.A. Travitzky, R.L. Boxman, S. Goldsmith and B.Z. Weiss, "Vacuum arc deposition of TiN, NbN and TiN/NbN multilayer coatings", Surface and Coatings Technology, Vol. 120-121, pp. 2199-225, 1999.
  106. V.N. Zhitomirsky, I. Grimberg, M.C. Joseph, R.L. Boxman, A. Matthews and B.Z. Weiss, "Vacuum arc deposition of conductive wear resistant coatings on polymer substrates", Surface and Coatings Technology, Vol. 120-121, pp. 373-377, 1999.
  107. R.L. Boxman, V.N. Zhitomirsky, I. Grimberg, L. Rapoport, S.Goldsmith, and B.Z. Weiss, “Structure and hardness of vacuum arc deposited multi-component nitride coatings of Ti, Zr and Nb”, Surface and Coatings Technology, Vol. 125, pp. 257-262, 2000.
  108. I.I. Beilis, M. Keidar, R.L. Boxman, S. Goldsmith, J. Heberlein, and E. Pfender, "Radial plasma flow in a hot anode vacuum arc", J. Appl. Phys., Vol. 86, pp. 114-119, 1999.
  109. N. Parkansky, B. Alterkop, S. Goldsmith, R.L. Boxman, Yu Rosenberg, and Z. Barkay, "The effect of an electric field on the high temperature oxidation of copper in air", Surface and Coatings Technology, Vol. 120-121, pp. 668-671, 1999.
  110. N. Parkansky, B. Alterkop, S. Goldsmith, and R.L. Boxman, "The effect of applying an electric field during air annealing on the resistance of Ti films", J. Phys. D: Appl. Phys. Vol. 32, pp. 1503-5, 1999.
  111. E. Gidalevich, S. Goldsmith, R.L. Boxman, “Shock front formation by two isotropic supersonic plasma jets”, IEEE Transactions on Plasma Science, Vol. 27, No. 4, 1045-1048, 1999.
  112. E. Gidalevich, S. Goldsmith, R.L. Boxman, Interaction of two dissimilar plasma jets, IEEE Transaction on Plasma Science, 27, No. 4, 1164-1168, 1999.
  113. . I. Beilis, M. Keidar, R. L. Boxman, and S. Goldsmith, “Plasma Expansion and Current Flow in a Vacuum Arc with a Small Anode”, IEEE Trans. Plasma Sci., Vol.27, N4, 1999, (pp.872-876).
  114. I. I. Beilis, R. L. Boxman, S. Goldsmith and V.L. Paperny. “Ion acceleration in radially expanding plasma of the hot refractory anode arc”, Appl. Phys. Lett. 75, No18, 1999,  (p.2734-2736)
  115. V. N. Zhitomirsky, I. Grimberg, L. Rapoport, R. L. Boxman, N. A. Travitzky, S. Goldsmith and B.Z. Weiss "Bias voltage and incidence angle effects on the structure and properties of vacuum arc deposited TiN coatings", Surface Coat. Technol, Vol. 133-134 (2000), p.p. 114-120.
  116. I.I. Beilis, M. Keidar, R.L. Boxman, and S. Goldsmith, “Interelectrode plasma parameters and plasma deposition in a hot refractory anode vacuum arc”, Physics of Plasmas 7, p.p. 3068-3076, 2000.
  117. I.I. Beilis, R.L. Boxman, S. Goldsmith, and V.L. Paperny, “Ion acceleration in the radially expanding plasma of the hot refractory anode vacuum arc”, Appl. Phys. Lett. 75, pp. 2734-2736, 2000.
  118. I.I. Beilis, R.L. Boxman, S. Goldsmith, and V.L. Paperny, “Radially expanding plasma parameters in a hot refractory anode vacuum arc”, J. Appl. Phys. 88, p.p. 6224-6231, 2000.
  119. N. Parkansky, B. Alterkop, S. Goldsmith, R.L. Boxman, H. Wulff, M. Quaas, and A. Quade, “Nano‑organization of thin titanium films by an electric field during vacuum arc deposition”, Thin Solid Films 377-378, pp. 507-511, 2000.
  120. N. Parkansky, V.N. Zhitomrisky, B. Alterkop, S. Goldsmith, R.L. Boxman, Y. Rosenberg, and Z. Barkay, “Effect of Transverse Current Injection During Vacuum Arc Deposition of TiN”, Surf. Coat. Technol. Vol. 133-4, pp. 101-5, 2000.
  121. E. Gidalevich, S. Goldsmith, R.L. Boxman, “Vacuum arc plasma jet interaction with neutral ambient gas” J. Phys. D: Appl. Phys. Vol. 33, pp. 2598-2604, 2000.
  122. I.I. Beilis, S. Goldsmith, R.L. Boxman, “The hot refractory anode vacuum arc: a new plasma source for metallic film deposition”, Surface Coat. Technol, Vol. 133-134 (2000), p.p. 114-120.
  123. L. Rapoport, N. Parkansky, I. Lapsker, A. Rayhel, B. Alterkop, R.L. Boxman, S. Goldsmith, L. Burstain, “Effect of transverse current injection on the tribological properties of WC cemented carbide”, Wear Vol. 249, pp. 1-5, 2001.
  124. E. Gidalevich, R.L. Boxman, S. Goldsmith “Applicability of the Hydrodynamic Approximation to Current-Carrying Plasma Jets During Their Radial Expansion”, IEEE Trans. Plasma Sci. Vol. 29, pp. 371-376, 2001.
  125. E. Gidalevich, S. Goldsmith, R.L. Boxman, “Modelling of nonstationary vacuum arc plasma jet interaction with a neutral background gas”, J. Appl. Phys. Vol. 90, pp. 4355-4360, 2001.
  126. R.L. Boxman, “Early History of Vacuum Arc Deposition”, IEEE Trans. Plasma Sci. Vol. 29, pp. 759-761, 2001.
  127. R.L. Boxman, “Recent Developments in Vacuum Arc Deposition”, IEEE Trans. Plasma Sci. Vol. 29, pp. 762-767, 2001.
  128. V.N. Zhitomirsky, O. Zarchin, S.G. Wang, R.L. Boxman, and S. Goldsmith, “Ion Current Produced by a Vacuum Arc Carbon Plasma Source”, IEEE Trans. Plasma Sci. Vol. 29, pp. 776-780, 2001.
  129. E. Gidalevich, S. Goldsmith, R.L. Boxman, “Supersonic Plasma Flow Near a Point Charge”, J. Phys. D.: Applied Physics Vol. 35, pp. 199-204, 2002.
  130. I.I. Beilis R.L. Boxman, S. Goldsmith, “ A hot refractory anode vacuum arc: Nonstationary plasma model”, IEEE Trans. Plasma Sci. Vol 29, pp. 690-694, 2001.
  131. I.I. Beilis, S. Goldsmith, R.L. Boxman, “Interelectrode plasma evolution in a hot refractory anode vacuum arc: Theory and comparison with experiment”, Phys. Plasmas, Vol. 9, pp. 3159-3170, 2002.
  132. E. Gidalevich, S. Goldsmith and R. L. Boxman "Shock Discontinuity in High-Current Vacuum Arc", IEEE Trans. Plasma Sci. Vol. 29, pp. 700-703, 2001.
  133. N. Parkansky, B. Alterkop, S. Goldsmith, R.L. Boxman, Z. Barkay. Thermal air oxidation of copper in an applied electric field. Surface and Coating Technology 146-147 (2001) 13.
  134. E. Gidalevich, S. Goldsmith, and R. L. Boxman, “Shock front formation at vacuum arc anodes”, J. Appl. Physics, Vol. 92, No. 9, pp. 4891 – 4896, 2002.
  135. E. Gidalevich, S. Goldsmith and R.L. Boxman, "Theoretical modelling of high pressure argon arc radiation" Plasma Source Science and Technology, Vol. 11, No. 4, pp. 513-519, 2002.
  136. E. Gidalevich, S. Goldsmith and R.L. Boxman, “The role of the electrical polarization field in magnetic plasma confinement”, J. Phys. D: Appl. Phys. Vol. 36, pp. 653-660, 2003.
  137. B. Alterkop, N. Parkansky, S. Goldsmith, and R.L. Boxman, “Effect of air annealing on opto-electrical properties of amorphous tin oxide films”, J. Phys. D: Appl. Phys. Vol. 36, pp. 552-558, 2003.
  138. O. Zarchin, V.N. Zhitomirsky, S. Goldsmith, and R.L. Boxman, “Interaction of a vacuum arc plasma beam with an obstacle positioned normal to the plasma flow”, J. Phys. D.: Appl. Phys. Vol. 36, pp. 2262-8, 2003.
  139. O. Zarchin, V.N. Zhitomirsky, R.L. Boxman, and S. Goldsmith, “Transport of a Vacuum-Arc Produced Plasma Beam in a Magnetized Cylindrical Duct”, IEEE Trans. Plasma Sci. Vol. 31, pp. 977-982, 2003.
  140. T. David, S. Goldsmith, and R.L. Boxman, “Electro-Optical and Structural Properties of Thin ZnO Films Prepared by Filtered Vacuum Arc Deposition” Thin Solid Films, 447-448C, pp. 61-67, 2003.
  141. N. Parkansky, B. Alterkop, S. Goldsmith, and R.L. Boxman, “Effect of an applied voltage during annealing on the resistivity and transparency of the amorphous tin oxide films”, J. Vac. Sci. Technol. Vol A21, pp. 1923-6, 2003.
  142. I.I. Beilis, A. Nemirovsky, S. Goldsmith, R.L. Boxman, “Two-dimensional thermal model of a refractory anode in a vacuum arc”, IEEE Trans. Plasma Sci., 31, No. 5, (2003), pp.958-962.
  143. I.I. Beilis, A. Shashurin, D. Arbilly, S. Goldsmith, and R.L. Boxman “Copper film deposition by a hot refractory anode vacuum arc”, Surface and Coating Technology 177-178 (2004) pp. 233-7.
  144. E. Gidalevich, R.L. Boxman, S. Goldsmith, “Hydrodynamic effects in liquids subjected to pulsed low current arc discharges”,  J. Phys. D.: Appl. Phys. Vol. 36, pp. 1509-14, 2004.
  145. V.N. Zhitomirsky, R.L. Boxman, S. Goldsmith, "Plasma distribution and SnO2 coating deposition using a rectangular filtered vacuum arc plasma source”, Surface and Coating Technology 185 (2004) pp. 1-11.
  146. E. Gidalevich, S. Goldsmith, and R. L. Boxman, "Comparative characteristics of high-pressure arc radiation in argon, krypton and xenon atmospheres", Plasma Source Sci. and Tech. 13, No. 3, pp. 454-460, 2004.
  147. N Parkansky, R L Boxman, B Alterkop, I. Zontag, Y Lereah, Z Barkay, “Single-Pulse Arc Production of Carbon Nanotubes in Ambient Air” J. Phys. D: Appl. Phys. Vol. 37, pp 2715-19, 2004.
  148. V.N. Zhitomirsky, R.L. Boxman, S. Goldsmith, Influence of the aperture diameter on plasma transport through the annular anode of a vacuum arc plasma deposition system", Surface Coat. Technol., 188-189 (2004) pp. 220-227
  149. I.I. Beilis, A. Shashurin, A. Nemirosvsky, S. Goldsmith, R.L. Boxman, “Anode temperature distribution and coating characteristics in a Hot Refractory Anode Vacuum Arc with an asymmetric anode” Surface and Coatings Technology Vol. 188-189 (2004) pp. 228-233.
  150. E. Gidalevich, S. Goldsmith, and R. L. Boxman, “Macroparticle rotation in the vacuum arc plasma jet”, J. Appl. Phys. 95, No. 6, pp. 2969-2974, 2004.
  151. N. Parkansky, B. Alterkop, R.L. Boxman, S. Goldsmith, Z. Barkay, Y Lereah, “Pulsed discharge production of nano- and micro-particles in  ethanol and their characterization” Powder Technology Vol. 150 (2005) pp. 36-41.
  152. I.I. Beilis, A. Shashurin, A. Nemirovsky, R.L. Boxman, and S. Goldsmith “Imaging of the Anode Plasma Plume Development in a Hot Refractory Anode Vacuum Arc”, IEEE Trans. Plasma Sci. Vol. 33, pp. 408-9, 2005.
  153. T David, S Goldsmith and R.L. Boxman, “Dependence of zinc oxide thin film properties on filtered vacuum arc deposition parameters”, J. Phys. D: Appl. Phys. 38 No 14 (21 July 2005) 2407-2416
  154. V.N. Zhitomirsky, T. David, R.L. Boxman, S.  Goldsmith, A. Verdyan, Ya.M. Soifer, L. Rapoport, “Properties of SnO2 coatings fabricated on polymer substrates using filtered vacuum arc deposition”, Thin Solid Films 492 (2005) 187-194.
  155. .I. Beilis, A. Shashurin, R.L. Boxman and S. Goldsmith, “Influence of background gas pressure on copper film deposition and ion current in a hot refractory anode vacuum arc” Surface & Coatings Technology 200 (5-6): 1395-1400 Nov. 21 2005
  156. R. L. Boxman, I.I. Beilis, E. Gidalevich, and V. N. Zhitomirsky, “Magnetic control in vacuum arc deposition”, IEEE Trans. Plasma Sci. 33, pp. 1618-1625, 2005.
  157. I.I. Beilis, A Shashurin, A. Nemirovsky, S. Goldsmith, and R.L. Boxman, “Measurements of the Anode Temperature in a Vacuum Arc With an Asymmetric Hot Refractory Mo Anode”, IEEE Trans. Plasma Sci., Vol.33, N5, Part 1I, 2005, (pp.1641-1647)
  158. V.N. Zhitomirsky, R.L. Boxman and S. Goldsmith, “Transport of a vacuum arc plasma beam through the aperture of an annular anode”, IEEE Trans. Plasma Sci., 33, No. 5 (2005), pp. 1631-1635.
  159. R.L. Boxman and V.N. Zhitomirsky, “Vacuum arc deposition devices”, INVITED REVIEW PAPER Rev. Sci. Inst 77.,021101 (1-13), 2006.
  160. E Gidalevich and R L Boxman, “Sub- and supersonic expansion of an arc channel in liquid”, J. Phys. D: Appl. Phys. 39 (2006) 652-659.
  161. E. Cetinorgu, S. Goldsmith, and R.L. Boxman, “Air annealing effects on the optical properties of ZnO-SnO2 thin films deposited by a filtered vacuum arc deposition system”. Semicond. Sci. Technol. 21 (2006) 364-369.
  162. N. Parkansky, O. Goldstein, B. Alterkop, R.L. Boxman, Z. Barkay, Yu. Rosenberg and G. Frenkel, “Features of micro and nano-particles produced by pulsed arc submerged in ethanol”, Powder Technology 161 (3): 215-219 Feb. 3, 2006
  163. N. Parkansky, G. Frenkel, B. Alterkop, R.L. Boxman, S. Goldsmith, Z. Barkay, Yu. Rosenberg and O. Goldstein, “Influence of pulsed arc parameters on powder production in ethanol”, Powder Technology 162 (2): 121-125 Mar 1, 2006.
  164. I.I. Beilis, A. Shashurin, R.L. Boxman, and S. Goldsmith, “Total ion current fraction in a hot refractory anode vacuum arc”, Appl. Phys. Let. 88 (7): Art. No. 071501 Feb. 13 2006.
  165. V.N. Zhitomirsky, E. Cetinorgu, E. Adler, Yu. Rosenberg, R.L. Boxman and S. Goldsmith, “Filtered Vacuum Arc Deposition of Transparent Conducting Al-doped ZnO Films”, Thin Solid Films, 515 (2006), pp. 885-890.
  166. B Alterkop, S Goldsmith and R L Boxman “Drift wave instability in the presheath of a fully ionized collisional plasmaPlasma Sources Sci. Technol. 15 670-675, 2006.
  167. E. Gidalevich, R. L. Boxman, “Steady-state model of an arc discharge in flowing water”, Plasma Source Sci. Tech. 15, pp. 765-772, 2006
  168. B. Alterkop and R.L. Boxman, “Sagdeev Potential and Sheath Criterion for a Multi-Component”, Contrib. Plasma Phys. 46, No. 10, 826 – 833 (2006) / DOI 10.1002/ctpp.200610083.
  169. E. Çetinórgü, S. Goldsmith, Z. Barkay, and R.L. Boxman “The dependence of filtered vacuum arc depositied ZnO-SnO2 thin films characteristics on substrate temperature”, J. Phys. D: Appl. Phys. 39 (2006) 5245-5251.
  170. A. Moshkovith, V. Perfiliev, D. Gindin, N. Parkansky, R. Boxman, L. Rapoport, “Surface texturing using pulsed air arc treatment” Wear 263 (2007), pp. 1467–1469 (doi:10.1016/j.wear.2006.11.043).
  171. A Shashurin, I.I. Beilis, Y. Sivan, S. Goldsmith and R.L. Boxman, “Copper film deposition rates by a hot refractory anode vacuum arc and magnetically filtered vacuum arc” Surface and Coatings Technology, 201, N7, 2006, (p.4145-4151).
  172. Çetinörgü, E., Goldsmith, S. and Boxman, R.L. Optical Properties of ZnO- SnO2 Thin Films Deposited by Filtered Vacuum Arc: J. Phys. D: Appl. Phys., 39(9) 1878 (2006).
  173. Çetinörgü E., Goldsmith S., Zhitomirsky V., Boxman R.L., Bungay C.L, Optical Characterization of ZnO Thin Films Deposited by Filtered Vacuum Arc System: Semicond. Sci. Technol. 21 1303-1310 (2006).
  174. Çetinörgü, E., Goldsmith, S. and Boxman, R.L. Effect of Deposition Conditions on the Characteristics of ZnO-SnO2 Thin Films Deposited by Filtered Vacuum Arc: Thin Solid Films 515(3) 880 (2006)
  175. E.D. Bender, V.N. Zhitomirsky, R.L. Boxman, “Hall stratum filtered cathodic arc source for carbon plasma”, Surface & Coatings Technology 201 (2007), pp. 6095-6100.
  176. E. Çetinórgü, S. Goldsmith, and R.L. Boxman, “The effect of substrate temperature on filtered vacuum arc deposited zinc oxide and tin oxide thin films”, J. Crystal Growth 299 (2007) pp. 259-267.
  177. B. Alterkop, I.D. Duvinova, A.E. Durbinov, and R.L. Boxman, “The Double Sheath and the Plasma-Wall Boundary”, Contrib. Plasma Phys. 47, No. 3, 190-201, (2007) /DOI 10.1002/ctpp.200710027.
  178. E. Çetinórgü, S. Goldsmith, and R.L. Boxman, “The effect of annealing on filtered vacuum arc deposited ZnO thin films”, Surface and Coatings Technology 201 (2007), pp. 7266-7272.
  179. A Kleiman, A Márquez and R L Boxman,Performance of a magnetic island macroparticle filter in a titanium vacuum arc”, Plasma Sources Sci. Technol. Vol. 17, 015008, (2008).
  180. Çetinörgü, E., Goldsmith, S., Rosenberg Yu., Boxman R.L. Influence of annealing on the physical properties of filtered vacuum arc deposited tin oxide thin films J. Non-Crystalline Solids 353(26) 2595 (2007)
  181. Çetinörgü, E., Goldsmith, S. and Boxman, R.L. Post-deposition annealing on the optical properties of filtered vacuum arc deposited ZnO-SnO2 : J. Appl. Phys.:Cond. Matter 19(25) 256206 (2007).
  182. A. Moshkovith, V. Perfiliev, D. Gindin, N. Parkansky, R. Boxman, L. Rapoport, “Solid lubricants on textured surfaces obtained by pulsed air arc treatment”, Tribologia – Finish Journal of Tribology 4, Vol. 26, pp. 15-20, 2007.
  183. I.I. Beilis, A. Shashurin, R. L Boxman, “Measurement of Ion Flux as a Function of Background Gas Pressure in a Hot Refractory Anode Vacuum Arc IEEE Trans. Plasma Sci”., Vol.35, N4, Part 2, 2007, (pp. 973- 979).
  184. I.I. Beilis, A. Snaiderman, A Shashurin, R.L. Boxman, S. Goldsmith, “Copper film deposition and anode temperature measurements in a vacuum arc with tungsten anode”, Surface and Coatings Technology, 202, issue 4-7, 2007, (p.925-930).
  185. N. Parkansky, L. Glikman, I.I. Beilis, B. Alterkop, R.L.Boxman, D. Gindin, “W-C Electrode Erosion in a Pulsed Arc Submerged in Liquid”, Plasma Chemistry and Plasma Processing, v27, N6, p.789-797, 2007.
  186. A Shashurin, I I Beilis and R L Boxman, “Angular distribution of ion current in a vacuum arc with a refractory anode” Plasma Sources Sci. Technol. 17 (2008) 015016, doi:10.1088/0963-0252/17/1/015016
  187. N. Parkansky, B. Alterkop, R.L. Boxman, G. Leitus, O. Berkh, Z. Barkay, Yu. Rosenberg, N. Eliaz, “Magnetic properties of carbon nano-particles produced by a pulsed arc submerged in ethanol” Carbon 46 (2008) 215–219.
  188. B. Alterkop, E. Gidalevich, S. Goldsmith, and R.L. Boxman, “Fluid model of current-carrying and magnetized fully ionized plasma confined by two coaxial cylinder electrodes” J. Phys. D: Appl. Phys. 41 (2008) 105211.
  189. V.N. Zhitomirsky, E. Çetinörgü, R.L. Boxman, S. Goldsmith, “Properties of SnO2 Films Fabricated Using a Rectangular Filtered Vacuum Arc Plasma Source”, Thin Solid Films 516 (2008) 5079-5086.
  190. N. Parkansky, G. Frenkel, B. Alterkop, I. Beilis, R.L. Boxmana, Z. Barkay, Yu. Rosenberg, “Ni–C powder synthesis by a submerged pulsed arc in breakdown mode”, Journal of Alloys and Compounds 464 (2008) 483–487.
  191. I.I. Beilis, A. Shnaiderman, R.L. Boxman, “Chromium and titanium film deposition using a hot refractory anode vacuum arc plasma source”, Surface & Coatings Technology 203 (2008) 501–504.
  192. I.I. Beilis, D. Grach, A Shashurin, R.L Boxman, “Filling Trenches on a SiO2 Substrate with Cu Using a Hot Refractory Anode Vacuum Arc" Microelectronic Engineering, 85 1713-1716, 2008.
  193. N. Parkansky, B.A. Alterkop, R.L. Boxman, H. Mamane and D. Avisar, " Submerged Arc Breakdown of Sulfadimethoxine (SDM) in Aqueous Solutions" Plasma Chemistry and Plasma Processing, v28, N5, pp. 583–592, 2008.
  194. N. Parkansky, L. Glikman, I.I. Beilis, B. Alterkop, R.L. Boxman, Yu. Rosenberg, Z. Barkay, “W-C Synthesis in a Pulsed Arc Submerged in Liquid”, Plasma Chemistry and Plasma Processing, v28, N6, p.265-375, 2008.
  195. I.I. Beilis, A Shashurin, R.L Boxman, “Anode Plasma Plume Development in a Vacuum Arc with a Black-Body Anode-Cathode Assembly", IEEE Trans. Plasma Sci., Vol.36, N4, Part 1, 2008, (pp.1030- 1031).
  196. A Shashurin, I I Beilis and R L Boxman, "Experimental study of plasma parameters in a vacuum arc with a hot refractory anode", Plasma Sources Sci. Technol. 18 (2009) 045004" (doi:10.1088/0963-0252/18/4/045004).
  197. H. Marks, I.I. Beilis, R.L Boxman, “Measurement of the Vacuum Arc Plasma Force”, IEEE Trans. Plasma Sci., Vol.37, N7, Part 2, 2009, (pp.1332- 1337).
  198. I.I. Beilis and R.L. Boxman, “Metallic film deposition using a vacuum arc plasma source with a refractory anode", Surface and Coatings Technology, 204, N6-7, 2009, (p.865-871).
  199. Vladimir N. Zhitomirsky, Avi Raveh, Raymond L. Boxman, and Samuel Goldsmith, " Vacuum Arc Plasma Beam Produced From an Erbium Cathode" IEEE Trans. Plasma Sci., Vol. 37, N8, Part 1, 2009 (pp. 1517-1523).
  200. S. Goldsmith, E. Cetinorgu, R.L. Boxman, “Modeling the optical properties of tin oxide thin films” Thin Solid Films 517, (2009), pp 5146-5150.
  201. Sun Kyu Kim, Vinh Van Le, R. L. Boxman, Z. N. Zhitomirsky, Jeong Yong Lee, "Cathodic arc plasma deposition of nano-multilayered Zr-O/Al-O thin films", Surf. Coat. Technol. 204, (2010), pp 1697-1701.
  202. A Shashurin, I I Beilis and R L Boxman, "Heat flux to an asymmetric anode in a hot refractory anode vacuum arc", Plasma Sources Sci. Technol. 19 (2010) 015002" (doi: 10.1088/0963-0252/19/1/015002).
  203. I.I. Beilis, Y. Koulik, R.L. Boxman and D. Arbilly, “Al and Zn film deposition using a vacuum arc plasma source with a refractory anode", Surface and Coatings Technology, 205, N , 2010, p. 2369–2374.
  204. V.N. Zhitomirsky, S.K. Kim, L. Burstein and R.L. Boxman "X-ray photoelectron spectroscopy of nano-multilayered Zr-O/Al-O coatings deposited by cathodic vacuum arc plasma", Appl. Surface Sci. 256 (2010) 6246–6253.
  205. N. Parkansky, I.I. Beilis, D. Gindin, B. Alterkop, R.L. Boxman, A. Moshkovich, V. Perfilyev, L. Rapoport, Yu. Rosenberg, "Steel Surface Modification by Pulsed Air Arc Treatment", “Surface and Coatings Technology” 205 N2 287-293 2010.
  206. I.I. Beilis, Y. Koulik, R.L. Boxman, D. Arbilly, “Thin film deposition using a plasma source with a hot refractory anode vacuum arc”, J Mater Sci (2010) 45:6325–6331.
  207. I. Zukerman, V.N. Zhitomirsky, G. Beit-Ya’akov, R.L. Boxman, A. Raveh, S.K. Kim, Vacuum arc deposition of Al2O3–ZrO2 coatings: arc behavior and coating characteristics, J Mater Sci (2010) 45:6379–6388, DOI 10.1007/s10853-010-4734-7.
  208. I.I. Beilis, Y. Koulik, R.L. Boxman, "Temperature Distribution Dependence on Refractory Anode Thickness in a Vacuum Arc: Experiment", IEEE Trans. Plasma Sci., Vol.39, N6, Part 1, 2011, (pp. 1303-1306).
  209. I.I. Beilis, Y. Koulik, R.L. Boxman, "Temperature Distribution Dependence on Refractory Anode Thickness in a Vacuum Arc: Theory", IEEE Trans. Plasma Sci., Vol.39, N6, Part 1, 2011, (pp. 1307-1310).
  210. I.I. Beilis, Y. Koulik, R.L. Boxman, "Evolution of a Plasma Plume from Shower Anode in a Vacuum Arc with a Black-Body Electrode Configuration", IEEE Trans. Plasma Sci., Vol.39 SPECIAL ISSUE – IMAGES IN PLASMA SCIENCE, no. 11, pp. 2838-2839, 2011.
  211. I.I. Beilis, Y. Koulik, R.L. Boxman, “Ion current density measurements in a copper vacuum arc with different refractory anode thicknesses”, J. Appl. Phys. 111, 043302 (2012).
  212. N. Parkansky, A. Vegerhof, B.A. Alterkop, O. Berkh, R.L. Boxman "Submerged Arc Breakdown of Methylene Blue in Aqueous Solutions ", Plasma Chemistry and Plasma Processing, 2012, 10.1007/s11090-012-9385-9.
  213. O. Goldberg, E. Goldenberg, V.N. Zhitomirsky, S. Cohen, R.L. Boxman, Zirconium vacuum arc operation in a mixture of Ar and O2 gases: Ar effect on the arcing characteristics, deposition rate and coating properties”, Surface & Coatings Technology (2012) Vol. 206, pp. 4417-4424  doi:10.1016/j.surfcoat.2012.04.082
  214. E. Gidalevich, R.L. Boxman, “MICROWAVE EXCITATION OF SUBMERGED PLASMA BUBBLES”, J. Phys. D: Appl. Phys. 45 (2012) 245204.
  215. N. Parkansky, I.I. Beilis, B. Alterkop, R.L. Boxman and Yu. Rosenberg, "Magnetic field influence on pulsed air arc anode mass loss" J. Phys. D: Appl. Phys. 45 045401 doi:10.1088/0022-3727/45/4/045401.
  216. M.N. Horenstien, M.K. Mazumder, R.C. Sumner, J. Stark, T. Abuhamed, and R. Boxman, "Modeling of Trajectories in an Electodyamic Screen for Obtaining Maximum Particle Removal Efficiency", IEEE Trans. In. Appl. 49, pp. 707-713, 2013.
  217. E. Çetinörgü-Goldenberg, L. Burstein, I. Chayun-Zucker, R. Avni, R.L Boxman “Structural and Optical Characteristics of Filtered Vacuum Arc Deposited N:TiOx Thin Films” Thin Solid Films 537, 28-35, 2013. (http://dx.doi.org/10.1016/j.tsf.2013.04.116).
  218. I.I. Beilis, Y. Koulik, R.L. Boxman, “Sn thin film deposition using a vacuum arc plasma source with a refractory anode", Surface and Coatings Technology, 232, N 15 October, 2013, p. 936–940.
  219. I.I. Beilis, Y. Koulik, R.L. Boxman, "Cu Ion Current Measurements in a Vacuum Arc with a Black Body Electrode Configuration", IEEE Trans. Plasma Sci., Vol.41, N8, Part II, 2013, (pp. 1987-1991).
  220. I.I. Beilis, Y. Koulik, R.L. Boxman, "Effective Cathode Voltage in a Vacuum Arc with a Black Body Electrode Configuration", IEEE Trans. Plasma Sci., Vol.41, N8, Part II, 2013, (pp. 1992-1995).
  221. N. Parkansky, E. Faktorovich Simon, B.A. Alterkop, R.L. Boxman, O. Berkh "Decomposition of Dissolved Methylene Blue in Water Using a Submerged Arc Between Titanium Electrodes" Plasma Chemistry and Plasma Processing, DOI 10.1007/s11090-013-9465-5, 2013.
  222. N. Parkansky, V. Yakubov, E. Faktorovich Simon, B. A. Alterkop, R.L. Boxman, O. Berkh "Removal of Methylene Blue from Aging Water Solutions Treated by a Submerged Arc" Plasma Chemistry and Plasma Processing, (2014) 34:745–754.
  223. I.I. Beilis, Y. Koulik, R.L. Boxman “Cu film deposition using a vacuum arc with a black-body electrode assembly”, Surface & Coatings Technology258 (2014) 908–912.
  224. Mohammed Ibrahim Jamesh, R.L. Boxman, Neil J. Nosworthy, I. S. Falconer, Paul K Chu, Marcela M. M. Bilek, Alexey Kondyurin, R. Ganesan, and David R. McKenzie “Graded Metal Carbon Protein Binding Films Prepared by Hybrid Cathodic Arc - Glow Discharge Plasma Assisted Chemical Vapor Deposition” Surface & Coatings Technology 265, 222-234, 2105.
  225. Parkansky, N; Yakubov, Violetta; Beilis, Isak; Boxman, Raymond; Berkh, Olga "Electrode erosion during submerged arc treatment of methylene blue water solution", J. Phys. D: Appl. Phys. 48: 225202 (9pp).
  226. I.I. Beilis, B. Sagi, V. Zhitomirsky, and R. L. Boxman, “Cathode spot motion in a vacuum arc with a long roof-shaped cathode under magnetic field”, Journal of Applied Physics 117, 233303 (2015); doi: 10.1063/1.4922862
  227. I.I. Beilis, Y. Koulik, Y. Yankelevich, D.Arbilly, and R.L. Boxman, "Thin-Film Deposition With Refractory Materials Using a Vacuum Arc" IEEE Trans. Plasma Sci., vol. 43, pp. 2323-2328, 2015
  228. Mohammed Ibrahim Jamesh, Penghui Li, Marcela M.M. Bilek, R.L. Boxman, David R. McKenzie, Paul K. Chu, "Evaluation of Corrosion Resistance and Cytocompatibility of Graded Metal Carbon Film on Ti and NiTi Prepared by Hybrid Cathodic Arc / Glow Discharge Plasma-Assisted Chemical Vapor Deposition", Corrosion Science 05/2015; 97. DOI:10.1016/j.corsci.2015.04.022.
  229. I. Zukerman, E. Goldenberg, V.N. Zhitomirsky, A. Raveh and R. L. Boxman, “Thermal Stability of Er2O3 Coatings Deposited using Filtered Vacuum Arc”, J. Surf. Coat. Technol. 2, 2015, 13-19.
  230. I. Zukerman, R. L. Boxman and A. Raveh, “Reactive Magnetron Sputtering of ZrO2/Al2O3 Coatings: Alumina Content and Structure Stability", J. Surf. Coat. Technol. 2, 2015, 56-64.
  231. Mohammed Ibrahim Jamesh, R.L. Boxman, Marcela M.M. Bilek, Cenk Kocer, Tingwei Hu, Xuming Zhang, David R. McKenzie, Paul K. Chu, “Effects of pulse voltage and deposition time on the adhesion strength of graded metal/carbon films deposited on bendable stainless steel foils by hybrid cathodic arc - glow discharge plasma assisted chemical vapor deposition”, Applied Surface Science 366 (2016) 535–544.
  232. Ariel Meirovich, Naum Parkansky, Raymond L. Boxman, Olga Berkh, Zahava Barkay, Yuri Rosenberg, "Treatment of Methylene Blue Water solution by Submerged Pulse Arc in Multi-electrode Reactor", Journal of Water Process Engineering, 13 (2016), 53-60.
  233. I. Zukerman, R. L. Boxman and A. Raveh, "Effect of the substrate temperature and bias voltage on the properties of ZrO2/Al2O3 coatings produced by pulsed magnetron sputtering and filtered vacuum arc deposition", Functional Nanostructures 1, 2016, 35-43.
  234. I.I. Beilis, Y. Koulik, R.L. Boxman, “Anode Temperature Evolution in a Vacuum Arc with a Blackbody Electrode Configuration”, IEEE Trans. Plasma Sci., Vol.45, N4, August 2017.
  235. G. Makrinich, A. Fruchtman, D. Zoler and R. Boxman, “Electric force on plasma ions and the momentum of the ion-neutrals flow”, by J. Appl. Phys. 123, 173302, 2018. DOI: 10.1063/1.5007817.
  236. I.I. Beilis, Y. Yankelevich, R.L. Boxman, “Plasma Generation in a Double Anode Vacuum Arc", IEEE Trans. on Plasma Sci. Vol. 47, No. 8, pp. 3484-3487, August 2019. DOI 10.1109/TPS.2019.2914996.
  237. Kumar Amit, Rishi Sharma, Gaurav Pransu, RL Boxman, “Evaluation of the photo electrode degradation in dye sensitized solar cells”, Russian Journal of Electrochemistry, Vol. 55, pp 829-840, September 2019.
  238. Isak I. Beilis , Senior Member, IEEE, D. Arbilly, Yefim Yankelevich and Raymond L. Boxman Thin Zr Film Deposition Using a Refractory Anode Vacuum Arc Plasma Sourcs”, IEEE Trans. on Plasma Sci. Vol 50, No. 9, 2709, 2022.

PROF. RAYMOND L. BOXMAN

January 2024

 

Address

School of Electrical Engineering, Tel Aviv University, POB 39040, Tel Aviv 69978, Israel

Residence

Rehov Gil 97, Herzliya 46291, Israel

E-mail

boxman@tauex.tau.ac.il

Date of Birth:

June 9, 1946

Place of Birth:

Philadelphia, PA

Family Status:

Married, four children

Military:

Capt., Signal Corp., U.S. Army Reserve. R.O.T.C. 9/64 - 6/68

 

Commissioned 6/68. Active Duty for Training 2/73 - 5/73,

 

Ft. Gordon, Ga. (Signal Officers Basic Course).

 

Seren (Res.) IAF

EDUCATION:

 

Summer, 1963

Microbiology course, sponsored by National Science Foundation at La Salle College, Philadelphia, PA.

 

February 1969

S.M., S.B., in Electrical Engineering, Massachusetts Institute of Technology.

Besides course in E.E., studied electives in physics & nuclear engineering.

In co-op program with General Electric Co.

Elected to honorary societies: Eta Kappa Nu, Tau Beta Pi, and Sigma Xi.

Thesis Title: Triggered Vacuum Interrupters.

Thesis Supervisor: G.L. Wilson.

 

 

February, 1973

Ph.D., Massachusetts Institute of Technology,

Department of Electrical Engineering.

Major: Electromagnetic Fields & Matter, with emphasis on plasma physics.

Minor: Bio-Electronics.

Thesis Title: Interferometric Measurement of Electron & Vapor Densities in a High Current Vacuum Arc.

Thesis Supervisor: G.L. Wilson.

 

EXPERIENCE:

 

Summers 1963,'64,'65

METROMEDIA INC, Radio Station WIP, Philadelphia, PA.

Radio Engineer – Duties included production of on-the-air show and remotely controlling two transmitters.

 

June - Sept 1966

GENERAL ELECTRIC CO. Missile & Space Div., Philadelphia, PA.  Co‑op Student - Aided in development of miniaturized capacitance type pressure transducer for space applications.  Designed electronic signal processor for transducer.  Experience in feedback and control, bridge circuits, transducers, operational amplifiers, telemetry systems, and integrated circuits.

 

Feb - June 1967

RESEARCH LABORATORY OF ELECTRONICS (M.I.T.), Cambridge, MA.  Student - Developed scheme for measuring diamagnetism of after glow beam discharge plasma.  Scheme compensated for magnetic flux diffusion through­ metal vessel, and for generator noise in the imposed magnetic field.

 

June - Sept 1967

GENERAL ELECTRIC CO., Missile and Space Div., Valley Forge, PA.   Co-op Student - Conducted research on utilizing positive column of plasma glow discharge to simulate re-entry plasma conditions, and their effect on microwave transmission. 

 

 

Feb - Sept 1968

GENERAL ELECTRIC CO., Power Transmission Div., Philadelphia, PA.  Research Engineer, (co-op assignment) - Conducted research on triggered vacuum interrupters, a device for switching high power electrical currents.  Investigated effects of contact and trigger voltages, circuit, trigger material, contact separation and magnetic field on triggering characteristics.  Studied photographs of arc, waveshapes, and device parts to propose triggering theory.  Experience in metal vapor arcs, pulse circuits, vacuum technology, high speed photography, and material processing. Research formed basis for Master's thesis.

 

1968 - 1970

M.I.T. , Cambridge, MA. 

Teaching Assistant  - Conducted classes, tutorials, demonstrations and graded papers in third and fourth year courses in electromagnetics, electromechanics, and signals and systems analysis. Graded papers in graduate courses in plasma dynamics and microwave circuits.

 

June-Sept 1969

REHOBOTH INSTRUMENTS LTD , Rehoboth, Israel. 

Conducted feasibility study of use of SEC television system for recording x­ ray crystallography data for computer analysis.

 

1970 - 1971

MAGNETIC CORPORATION OF AMERICA , Cambridge, MA.

Consultant - aided in feasibility study of M.H.D. power generation for a  particular application. 

 

1970-1973

ELECTRIC POWER SYSTEMS ENGINEERING LABORATORY (M.I.T.) , Cambridge, MA. 

Research Assistant - Conducted research which formed basis for Ph.D. thesis.  Duties included design of vacuum chamber, laser, interferometer, vibration isolation system and pulse circuits.  Measured electron & copper vapor densities by infrared and optical interferometry in a copper vapor arc such as those which occur in vacuum switches. Supervised undergraduate laboratory and thesis projects.

 

 

1973-1975

GENERAL ELECTRIC CO. Power Delivery Group, Philadelphia, PA. 

Sr. Research Engineer – Conducted development projects in vacuum circuit breakers & research in metal vapor arcs.  Research included measuring anode surface temperature during anode spot formation by spectral radiometry, theoretical analysis of anode spot formation mechanisms, and studying the motion of high current vacuum arcs in magnetic fields.

 

1975 to 2015

TEL AVIV UNIVERSITY, School of Engineering, Dept. of Physical Electronics. Professor of Electrical and Electronic Engineering - Instruct courses in electromagnetic theory, circuits, lasers, thin films, technical writing and electrical discharges in gases. Conduct research and supervise graduate student research in electrical discharge physics and applications, and metallurgical and thin film coatings.

 

1979 to present

Consultant - Consultant on lasers, coatings, thin films, microwave, plasmas and electrical discharge applications.

 

Sept.1981 - June 1982

UNIVERSITY OF SOUTH CAROLINA, Dept. of Electrical and Computer Engineering. 

Visiting Associate Professor - Instructed undergraduate course in engineering analysis, and graduate courses on electrical discharges. Graduate course on experimental techniques in plasma research presented state-wide via the USC television system.  Conducted research and advised graduate students on electrical breakdown in vacuum in the USC High Voltage Laboratory.

 

July-August 1982

BROWN BOVERI RESEARCH CENTER , Baden, Switzerland,

Visiting Scientist - Advised on the framing, organization, set-up, and initiation of a coordinated experimental and theoretical research program on vacuum arc phenomena relevant in vacuum switchgear.

 

 

1989-1990

DREXEL UNIVERSITY, Philadelphia, PA

Visiting Professor of Electrical and Computer Engineering - Instructed graduate course on thin film technology and undergraduate courses in electromagnetic fields.  Initiated research program on using vacuum arc deposition to produce high temperature superconducting films.

 

July-August 1995

MULTI-ARC INC. Rockaway, N.J.,

Guest Scientist - Conducted research on diamond-like carbon coatings.

 

August-November 2013

SYDNEY UNIVERSITY, Sydney, NSW, Australia

Visiting Professor in the Department of Physics - Conducted research on graded biocompatible coatings.

 

May-June 2014

YALE UNIVERSITY, New Haven, CT, U.S.A.,

Guest Scientist – Wright Laboratory. Historical research on Arthur Williams Wright.

 

February-March 2015

UNIVERSITY OF CANTERBURY, Christchurch, New Zealand.

Department of Electrical and Computer Engineering – Investigation of ZnO based films and devices.

 

MEMBERSHIPS:

Fellow of the Institute of Electrical & Electronics Engineers and the IEEE Nuclear & Plasma Sciences Society

Society of Sigma Xi

Israel Vacuum Society

Israel Plasma Science and Technology Society

Fellow of the International Microwave Power Institute

 

PROFESSIONAL AND UNIVERSITY ACTIVITIES:

 

October 1982

Publicity chairman and coordinator for video tape publication of invited lectures for the Xth International Symposium on Discharges and Electrical Insulation in Vacuum. (Columbia SC).

 

Sept. 1983

Editor for vacuum arcs for special issue of the IEEE Transactions on Plasma Science entitled “Vacuum Discharge Plasmas”.

June 1983

Editor for vacuum arcs for special issue of IEEE Transactions on Electrical Insulation entitled “Insulation and Breakdown in Vacuum”.

1981/2

While abroad on sabbatical, gave invited seminars on various vacuum arc topics at the State University of New York at Buffalo, University of Minnesota, Calor-Emag Company (Federal Republic of Germany), Westinghouse Research and Development Center, and the Oak Ridge National Laboratory.

1983

University administrative responsibility has included serving on engineering faculty computer committee, and on the executive committee of the university safety council. Chaired ad-hoc faculty committee for setting up infrastructure for VAX computers.

1984-86

Head, Department of Interdisciplinary Studies.

1986-1989

Faculty graduate education committee.

1990-1992

Faculty electrical engineering curriculum committee.

1986

Organizing committee chairman of the XIIth International Symposium on Discharges and Electrical Insulation in Vacuum and proceedings editor. 

October 1987

Guest Editor, IEEE Transactions on Plasma Science, special issue on Vacuum Discharge Plasmas.

February 1988

Guest Editor, IEEE Transactions on Electrical Insulation, special issue on Insulation and Breakdown in Vacuum.

1988-

Member of the Permanent International Scientific Committee of the International Symposia on Discharges and Electrical Insulation in Vacuum. Secretary 1988-1994. Chairman - Awards Committee, 1989-1993.

1988 -2006

Associate Editor, IEEE Transactions on Plasma Science. 

December, 1990

Guest Editor, special issue of IEEE Transactions on Plasma Science on “Plasma Deposition”.

1990-2004

Member of the Hard Coatings and Vapor Deposition Technology Symposium Committee, Int. Conf. on Metallurgical Coatings and Thin Films.

1993-1996

Faculty of Engineering graduate education committee

1993-2000

TAU appointments and promotions committee, for the Center for Technological Education (Holon).

1995-2000

TAU equipment committee.

1996-98

Faculty of Engineering computer committee

1997-2001

Founder and First Chairman, Israel Plasma Science and Technology Society

 

1999-2007

Member of the Editorial Board, Plasma Chemistry and Plasma Processing

2000-2002

Chairman, Faculty of Engineering M.Sc. Committee

1999-2006

Head, Faculty of Engineering Materials Engineering Program

2002-3

Chairman, ad hoc committee investigating Faculty of Engineering organization

2002-4

Member, Tel Aviv University M.Sc. Committee

Feb 2004

Chairman, 7th Israeli Conference on Plasma Science and Applications

2004 -7

Chairman, Department of Interdisciplinary Studies, School of Electrical Engineering

2004-9

Chairman, Faculty of Engineering Research Committee

Feb 2006

Chairman, International Conference on Superhard Coatings

2006-

Incumbent, Kranzberg Chair of Plasma Engineering, Tel Aviv University

2007-

Member of the Editorial Board, Plasma Sources Science and Technology

2008-9

Vice-Dean for Research, Faculty of Engineering

2008-9

Member of the Organizing Committee, Israel Materials Engineering Conference

2012-

Member of the Industrial Affiliates Program Committee, Faculty of Engineering

2012-3

Member of the Program Committee, 47th Annual Microwave Power Symposium

2013

Member of the Program Committee, 15th Israeli Conference on Plasma Science and Applications

2013-2014

Chairman of the Technical Program Committee of the 48th Annual Microwave Power Symposium (IMPI 48)

2014-2015

Chairman of the Technical Program Committee of the 49th Annual Microwave Power Symposium (IMPI 49)

2015-

 

2023

Corresponding Member of the Board of Governors, International Microwave Power Institute (IMPI)

Member of Steering Committee, Israel Fusion Energy Institute

 

Honors:

 

October 1984

Boris and Renee Joffe Award, presented by the International Union for Electrodeposition and Surface Finishing at the 11th World Congress on Metal Finishing (Interfinish '84).

January 1989

Fellow of the Institute of Electrical and Electronics Engineers, for “Advances in Vacuum Arc Theory and its Applications”. 

September 2000

Walter Dyke Award, by the Permanent International Scientific Committee of the International Symposia on Discharges and Electrical Insulation in Vacuum, for “his outstanding body of work in the field of electrical discharges in vacuum, in particular for his contributions to the physics, technology, and applications of vacuum arc plasmas”.

June 2018

Fellow of the International Microwave Power Institute.

 

Tel Aviv University makes every effort to respect copyright. If you own copyright to the content contained
here and / or the use of such content is in your opinion infringing, Contact us as soon as possible >>